Results 1 to 20 of 631
Threaded View
-
11-16-2018 #10
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,120
The big wires are 10 gauge. The little wire is 18 gauge at most. The two outside wires need to be 10 gauge and go to the motor. This should be done via high quality butt connectors (unshielded with a proper crimp tool...with glue lines heatshrink tubing). The two inter big wires also need to be 10 gauge and also need to incorporate the signal wire. The solution that I proposed, with the 3 cavity connector from Spal has the three wires worked into it. There are the two wires going to the controller, plus the signal wire, all in one connector.
I guess I would want to see what is at the end of the wires that you got from the junk yard.
Andrew
1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
Reply With Quote
