Results 1 to 5 of 5
Thread: DBW throttle body
-
10-31-2014 #1
Registered User
- Join Date
- Jun 2010
- Location
- meriden. kansas
- Posts
- 108
DBW throttle body
OK this something I have been searching for a while and can't find an answer too. I have an 03 truck harness and I have a cheap pro comp intake I want to use on my 5.3. The intake is 4 bolt are there any throttle bodies out there I can use. I can only find one that is an 8 pin setup, it is off a earlier gxp. I just want to know if my harness and pedal will support it or if I will end up having issues with it only opening 90% like I have read in other forums. It appears from my research that that issue only occurs when trying to convert from the 8 pin to the 6 pin plug. Thanks for your help. Matt
Matt Ditch, 1968 Camaro, Hotchkis Springs, CCP sway bar, Global West control arm bushings, 5.3 with TH400, Boss 338
-
11-01-2014 #2
Registered User
- Join Date
- Dec 2010
- Location
- St Louis
- Posts
- 453
Simplest solution, 3 to 4 bolt adapter:
http://www.ebay.com/itm/New-76-102mm...608f9b&vxp=mtr
11-01-2014 #3
Registered User
- Join Date
- Jun 2010
- Location
- meriden. kansas
- Posts
- 108
I need an adapter to go from 4 bolt to 3 bolt then
Matt Ditch, 1968 Camaro, Hotchkis Springs, CCP sway bar, Global West control arm bushings, 5.3 with TH400, Boss 338
11-01-2014 #4
Registered User
- Join Date
- Dec 2008
- Location
- Detroit
- Posts
- 2,664
If you need 4 bolt intake to 3 bolt TB, here you go.
http://www.ebay.com/itm/USA-Made-LS1...2cfcae&vxp=mtrBig dreams, small pockets....
Chris--
'72 Cutlass S LSA/T56 Magnum
Bowler Performance, Forgeline, Speedtech, ATS, Speartech, KORE3, Ridetech coilovers
Project Motor City Madness
11-01-2014 #5
Registered User
- Join Date
- Jun 2010
- Location
- meriden. kansas
- Posts
- 108
Well thank you that is what I need guess I was using the wrong wording on ebay to find.
Matt Ditch, 1968 Camaro, Hotchkis Springs, CCP sway bar, Global West control arm bushings, 5.3 with TH400, Boss 338
Reply With Quote
