What kinda spare you have ?

[ProTouringNyc]

Hey guys with all of the big brakes conversions what are you using for a spare tire. I've talked this over with Steve (StreetFighter) and came up empty. Looking to do the power tour this year coming and really dont wanna travel without one, any help would be greatful. Currently running 18 inch staggard offset budnik gasser wheels with bear brakes

[steemin]

excellent question..
Subscribing.
Scott

[yody]

2 cans of fix a flat and a AAA card

[derekf]

Got a 2000 Camaro space saver spare. And a AAA card.

[MrQuick]

i read somewhere that a GTO rim fits with the 13" brakes no problem...then run a different tire to match the height. I will find out tonight.

[parsonsj]

uh ... cell phone?

jp

[MrQuick]

my thing is go to my trailer pull out the jack and change the tire. or just load her up and take er home! LOL

[camcojb]

i read somewhere that a GTO rim fits with the 13" brakes no problem...then run a different tire to match the height. I will find out tonight.

The new GTO bolt circle is 5 on 200mm; close but different than the normal 5 on 4.75" most GM cars have. It may physically fit if there's enough wiggle-room on the rim, but it would make me nervous.

Jody

[MrQuick]

yeah i just read it was for 4th gen cars...aren't they 5 x 4.75 too??? more reading....

[parsonsj]

Jody,
Do you mean 120 mm?



jp

[MrQuick]

heres a link fo those who will use them as temp " get me the hell out of chainsaw Texas" spares....http://web.camaross.com/forums/showthread.php?t=359445

[DarkBuddha]

I'm seriously considering a 13" front disc upgrade, so I was a bit concerned about this issue as well. Anyway, since I just purchased a set of OEM Ford Mach1 heritage wheels, I want an appropriate spare, so I'm thinking I'll either get a spare for an '03 Mach1 or Cobra. Either one will fit a 13" rotor, and I should be able to get one for less than $100. Seems a reasonable solution for us Ford guys.

[ProTouringNyc]

Funny guys we have here well i've tried a few factory spares and nothing, and that fix a flat stuf is so messy when its time to change the tire. Well maybe one of the billet company will here our cries and have a solution

[Marty G Cars]

My spare tire is on my waist!

[Jagarang]

AAA Plus

[69rs]

My spare tire is on my waist!

Marty doesn't have spare tires, just spare cars!
This is a good thread, and something I need to think about. Hopefully before too long I will need to worry about it!

[derekf]

heres a link fo those who will use them as temp " get me the hell out of chainsaw Texas" spares....http://web.camaross.com/forums/showthread.php?t=359445

Good to know, Vince. I probably wouldn't have tried the spare on the front brakes once I got them assembled, and would have been unhappy when I found it didn't fit. Thanks for the link.. but, where is chainsaw Texas? I think that'd be what I'd need the spare to get to!

[CAMAROBOY69]

This site pretty much talked me out of a spare years ago. Soo with that said I have Hagerty and a cell phone.

[Steve Chryssos]

Remember that --if you have posi--your spare should be the same diameter as your REAR tires. Otherwise the two rear tires will go down the road at different speeds and your posi will be very sad.

[parsonsj]

In all seriousness, a spare tire is a non-starter for me. My front suspension is custom built, and all the packaging is done to 1/2" tolerance (wheel to caliper, tire to fender lip, tire to frame rail, wheel to tie rod, tire to master cylinder, tire to hood latch, etc. etc.).

On the rear, with its "friendlier-to-a-spare-design", I will have to disconnect the coilovers and driveshaft to get the tires off. That isn't something I'm gonna be able to do on the side of the road anyway.

My plan is to pray for a careful (or bribable) flat bed operator who responds quickly to my call for help.

So it ain't even worth considering ... sorry for making light of your question.

jp