Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6
    1. #1
      Join Date
      Mar 2007
      Location
      Mission Viejo, CA
      Posts
      631
      Country Flag: United States

      Need Help Measuring For New Wheels

      I recently decided to go ahead and purchase new Boze wheels. I had someone come to the house to measure the car. I wasn't sure he was as qualified as I was led to believe. I live in So. California and can't find someone to help me get this done. If anyone has a person who is qualified to do this I am willing to pay for their time. I want the car measured correctly. I already have the tires purchased to make it easier to measure accurately. I cant order the wheels until I Get the backspacing figured out. Any help would be appreciated. Thanks.

      1973 Hurst Edition Pontiac Grand Am: 430 CI of ERL built LS7, Tremec Magnum T-56 6-speed, Global West / Speedtech Suspension, Custom rear coil-over suspension, QA1 double adjustable shocks, Wilwood 6/4 piston disc brakes, Modulare C1 19" concave wheels. Shooting for 625 HP and 20 MPG!


    2. #2
      Join Date
      Mar 2004
      Location
      Mid-Michigan
      Posts
      2,764
      Country Flag: United States
      This isn't that difficult to do.
      1) Get the car sitting on jack stands close to the current ride height on a level surface.
      2) Remove the rear wheels.
      3) Clamp a long straight edge to the face of the rotor or drum brake where the wheels mount. (I have a piece of 1 x 1 pine, 28" long I use for this.)
      4) Tie a big nut or bolt to a piece of string and tape it to the inside of the outer wheel well so it hangs straight down from the inner lip. You may have to clean a spot so the tape will stick. I also use a big magnet sometimes if the wells are steel.
      5) Start measuring. Measure from the wheel mounting face to ALL points on the inner wheel well. Exhaust, springs, spring clamps, etc. anything that looks to be in the path of the tire.
      6) Measure from the bob string to the inner also. Measure to the wheel mounting face as well.
      7) Make yourself a drawing to write your dimensions on or go to Alstons site and print out their rear end ordering PDF. It walks you though most of this stuff also.
      http://www.cachassisworks.com/Attach...structions.pdf
      Mark:
      "Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
      This my Bad Ast thread...
      https://www.pro-touring.com/showthre...roject-Faze-II
      This is my Fotki album...
      http://astroracer.fotki.com/

    3. #3
      Join Date
      Mar 2007
      Location
      Mission Viejo, CA
      Posts
      631
      Country Flag: United States
      I see different methods of measuring done on various cars. The Wheelrite tool looks okay, but seems limited on backspacing. I would like to have the tire mounted to measuring tool as i've seen done. My assumption is that it gives a more accurate view of the available tire clearance. I also have to decide if I am willing to roll the fenders at this point. I run the wheel well trim on this car and would rather not remove it. The only other option is to go to a smaller tire which would be a 295/40/18. The 305 is very wide, but maybe I need to step back and decide what is more important. I have no desire to compromise on the build at this point. I won't be satisfied with a tire rub issue just for the sake of having a 19" wheel.
      1973 Hurst Edition Pontiac Grand Am: 430 CI of ERL built LS7, Tremec Magnum T-56 6-speed, Global West / Speedtech Suspension, Custom rear coil-over suspension, QA1 double adjustable shocks, Wilwood 6/4 piston disc brakes, Modulare C1 19" concave wheels. Shooting for 625 HP and 20 MPG!

    4. #4
      Join Date
      Mar 2004
      Location
      Mid-Michigan
      Posts
      2,764
      Country Flag: United States
      The wheel diameter has nothing to do with the cross-section measurements. Bigger diameters just mean shorter sidewalls and a harsher ride.
      You just need to get out in the shop and measure your car. You don't need a "Wheel-Rite" or any other fancy gizmo's... Rolling the lip is, of course, your choice.
      If you have any questions, holler.
      Mark
      Mark:
      "Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
      This my Bad Ast thread...
      https://www.pro-touring.com/showthre...roject-Faze-II
      This is my Fotki album...
      http://astroracer.fotki.com/

    5. #5
      Join Date
      Mar 2007
      Location
      Mission Viejo, CA
      Posts
      631
      Country Flag: United States
      I understand the difference between OD and cross section. I also understand that when you aren't used to measuring cars for wheels, you are better off letting a more experienced person take the lead. I build cars but I don't paint them as one example. So before I break out the measuring tools forgive me if I am being cautious before spending a few thousand hard earned dollars on wheels.
      1973 Hurst Edition Pontiac Grand Am: 430 CI of ERL built LS7, Tremec Magnum T-56 6-speed, Global West / Speedtech Suspension, Custom rear coil-over suspension, QA1 double adjustable shocks, Wilwood 6/4 piston disc brakes, Modulare C1 19" concave wheels. Shooting for 625 HP and 20 MPG!

    6. #6
      Join Date
      Mar 2004
      Location
      Mid-Michigan
      Posts
      2,764
      Country Flag: United States
      I've given you the basics to do it yourself so you don't have to rely on someone else. I myself would never rely on someone else's measurements. If they turn out wrong, it's on me and no one else. It's not that hard to do Bud, all you have to do is get out there and do it. Like I said, if you have ANY questions or get stuck, just holler...
      Take some measurements and post them.
      All you need is:
      1) The closest point to the wheel mounting face to the inner well or suspension.
      2) The total width of the wheel well from inside to outside
      3) The size of the tire.
      Give me those and I will work with you to get this figured out.
      Mark
      Mark:
      "Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
      This my Bad Ast thread...
      https://www.pro-touring.com/showthre...roject-Faze-II
      This is my Fotki album...
      http://astroracer.fotki.com/




    Advertise on Pro-Touring.com