Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Jan 2006
      Location
      Abbotsford, BC Canada
      Posts
      169

      1983 Buick Regal Pro Touring Project Vehicle

      Selling a long term project vehicle, just have no time to finish it.
      Selling a 1983 Buick Regal Project Car.
      Check out www.projectstressrelief.com to see the entire car and it's build. To many expensive parts to list here, check out the Project Partners page for a complete list.
      I have everything (other then the drive shaft) to complete the car. Front clip is sitting on my car trailer.
      Its needs a good home.
      Asking $25,000, have over $50,000 into it. If you know anyone interested in it, please pass it along. Sell it and make yourself some money !



      Name:  20140427_160026_resize.jpg
Views: 4565
Size:  138.1 KBName:  20140427_155445_resize.jpg
Views: 2544
Size:  216.8 KBName:  20140427_160018_resize.jpg
Views: 1573
Size:  190.2 KB
      Tim Baillie
      Owner / Publisher
      The Hot Rodder Journal
      Your Hot Rod Lifestyle Magazine
      www.hotrodderjournal.com


    2. #2
      Join Date
      Jun 2014
      Location
      Sacramento, CA
      Posts
      11
      Country Flag: United States
      Can you send all the details/mod list to [email protected] with more pictures . thanks!

    3. #3
      Join Date
      Jan 2006
      Location
      Abbotsford, BC Canada
      Posts
      169
      It does have a clean title. Everything is on www.projectstressrelief.com There is a complete list of parts used and pictures of the project since day one.
      Tim Baillie
      Owner / Publisher
      The Hot Rodder Journal
      Your Hot Rod Lifestyle Magazine
      www.hotrodderjournal.com

    4. #4
      Join Date
      Jun 2014
      Location
      Sacramento, CA
      Posts
      11
      Country Flag: United States
      Whats left to finish it to make it drivable?

    5. #5
      Join Date
      Jan 2006
      Location
      Abbotsford, BC Canada
      Posts
      169
      If you go to http://www.projectstressrelief.com/pages/partners.htm that partners page, there is a list of almost everything in the car.

      The sits the way the pictures are here on Pro-Touring.com

      The fuel injection has to be installed (have it)
      The engine/trans harness has to be wired (have it)
      The fuel line from the back has to be hooked up front (installed)
      The power steering has to be plumbed (have all the fittings and lines)
      The brake lines have to be hooked up from the prop valve to the master cylinder (have them)
      The front end has to be put back on the car (have it as a complete clip)
      The aluminum rad/electric cooling fan has to be installed and wired (have them)
      The front and rear bumpers have to be installed (have them)
      The wiper wiring has to be reconnected (have it)
      The steering column has to be installed (have it)
      The gauges have to be rewired to the new engine harness (have them)
      The car needs a head unit for the stereo to work, but the whole car is wired for it.
      The car needs a drive shaft built for it.
      The front two body mounted have to be installed (have them)

      Maybe a couple of other small things, but can't think of them right now to complete the car.
      Tim Baillie
      Owner / Publisher
      The Hot Rodder Journal
      Your Hot Rod Lifestyle Magazine
      www.hotrodderjournal.com




    Advertise on Pro-Touring.com