Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 33

    Hybrid View

    1. #1
      Join Date
      Nov 2012
      Location
      Sacramento, CA
      Posts
      1,918
      Country Flag: United States
      Quote Originally Posted by CTSV View Post
      Mine never puked oil i have about 2.25 quarts of 85-140 oil in mine but was pretty surprised at the heat of the housing under there.

      Does anyone know what heat range gear oil can withstand before breaking down and becoming ineffective?

      Most mineral based gear oils are good to 240°. Most Synthetic gear oils are good to 280°-300°. But many times the internal components (gears, bearings, etc) fail at temperatures below these numbers if they are made from inferior metals.

      When Harley mentioned rear ends running close to 300° & surviving racing conditions, those rear ends have the best components to the nth degree. We ran ours to 280° often with no failures, but we didn't buy crap from the cheapest vendor & throw it together. There is a LOT of care that goes into those rear ends from deburring every edge on the R&P, REM polishing the gears & bearing races, making sure the bearing preload is EXACT, etc. That's on top of buying the every best quality gears, bearings, etc.



      I think for most of the ProTouring world, commonly available imported rear end internals will fail somewhere in the low to mid 200's. I do not have personal hands on experience running the cheap-gear-brand-of-the-week in tough conditions, so I can't say at what temp they will fail. So my "low to mid 200's" guesstimate is just that.







    Advertise on Pro-Touring.com