Results 1 to 20 of 61
Hybrid View
-
12-03-2023 #1
Registered User
- Join Date
- Aug 2013
- Location
- Shelton WA
- Posts
- 152
I've finally got my shop organized enough to get some work done so back to work.
So this pile of parts I've collected for the last few years need to be put where they belong.
First up install the rear disc brakes and finally replace the upper control arm bushings. I did the brakes while the rear end was still under the car but decided to pull it out to do the bushings and new hardlines.
Next up, get the axle back in and swap the master cylinder to a Corvette unit and a 4 wheel disc proportioning valve.
-
Reply With Quote
