Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6
    1. #1
      Join Date
      Jul 2006
      Location
      Hackettstown, NJ
      Posts
      1,026

      Brake booster pin/ rod source

      Looking for a source that carries the GM Brake booster pin/ rod. They have 2 diff sizes and I may need a longer one. COuldnt find anything. Maybe need to use a diff part name? CPP has some but heard that are specific to their boosters?



    2. #2
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      You can get steel clevis pins and cotter keys at McMaster-Carr. What diameter and length do you need? I've got an assortment of them in 5/16 and 3/8 diameters...
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    3. #3
      Join Date
      Jul 2006
      Location
      Hackettstown, NJ
      Posts
      1,026
      3/8 rod
      3.85" long also one 4" long as that seems to be so called standard.


      Need to work with 79-81 Fbody booster and C3 M/C.

      stock Fbody Pin is 2.4" L and needs to be stretched 1.45" thereabouts.

      Talled to local machine shop this morning so awaiting call back. I need to get a nice lathe setup.

      DO need to speak to you John regarding the vents away.

    4. #4
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      yikes. Mine are all too short. Story of my life, lol.
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    5. #5
      Join Date
      Jul 2006
      Location
      Hackettstown, NJ
      Posts
      1,026
      The part needed is a spacer/ adapter as I found out today. Its a non cataloged item Wilwood sells. 300-8923 1.39" long which goes into the m/c bore. Hoping local machine shop can make a couple as its a time issue I am faced with vs cost. Wilwood's part is only $9 but 1 week to get.

    6. #6
      Join Date
      Mar 2005
      Posts
      345
      For a spacer pin, if handy with hand tools can make one. Find a grade 8 bolt in the correct diameter and cut the heat off. Cut it to a little longer then the desired length (use hte shank portion that was right under the head). Then with a file or grinder or such shape the ends while making it the proper length.

      Leave a smidgen long and test fit with some clay. Then as they say, file-to-fit.

      Bob.




    Advertise on Pro-Touring.com