Dash display HELP (IQ3 Stack....)

[Catmanzr]

Hi,
Can someone help me with a few questions? I have Gm LSA that I’m putting into a 67 nova. I purchased the LSA controller kit (19259293). My question is what dash display is available out there that will interface with the bulkhead connector and or OBD2 port? It seems silly to me that I have to re-sensor the whole motor when all the factory stuff is there.

I was real interested in the Stack Gauge but you have to mount their sensors.

I looked at racepak IQ3 and OBD2 module and called them this morning. They said theoretically it should work but you don’t know what information it will display until you plug it in and try it. I have a hard time spending a couple of grand and not knowing what kind of information I’m going to get.

Anyone got some helpful information on the subject? There seems to be phone and tablet apps out there that will display a lot of vehicle parameters but my head started spinning………and I don’t want to mount a tablet as a gauge cluster.

I would appreciate any info…..thanks Dan

[ccmc]

Dakota digital offers gauges the use the obdll port

[rallystyle]

speed hut has can gauges. auto meter has a new lcd race dash that looks nice. don't know if it will be obd2 compatible

[scott_fx]

I'm currently building one right now
http://youtu.be/77vv5QnnjBM
Completely obd-ii based. It's a work in progress and will be evolving. I could help you build one or possibly build a kit