Another quick project

[astroracer]

Thanks! It turned great!
I have been pushing this thing all around the shop and it is almost impossible to tip it over. I probably could if I really tried but it rolls around nicely. Besides, the way I have it loaded up now, all of the weight is in the bottom so it is even better.
I wrapped up the cart build this morning. Cut a piece of 1/2" plywood and screwed it to the cart. I then screwed a 3 dollar yard sale tool box to it and loaded all of my dies, press plates and the Swag Bender on the bottom shelf.

All of the press dies loaded in the box.

The press plates all load in beside the tool box.

The Swag Bender stores nicely in front of the tool box.

This organizes ALL of my bending stuff into one spot and there is room for more in the box!
I also added a spring clamp tool holder for the jack handle to hang in.

All done.

This is definitely a good thing and will keep all of this stuff in place so I don't have to go hunting for it.
Mark