65 GTO - Rear disks are in!

[tripower]

Finally got the Baer 12" rear Touring kit and installed it this past weekend. This weekend I'll finish up running the main brake line from front to rear and run the front lines. After that, it's time to bleed the brakes.

[USAZR1]

Looks great,tripower.

[ALLFAITH]

Sold mine recently with same set up. You will love it. GW was a complete bolt in and had teh QA-1's all around. great ride and adjustable.

Brad

[tripower]

Sold mine recently with same set up. You will love it. GW was a complete bolt in and had teh QA-1's all around. great ride and adjustable.

Brad

I went the complete GW set up but with the Konis. It was a pretty straight forward bolt in. the biggest PITA are the brake lines and adjustable prop valve!

Do you have any pics of your? I'd love to see them.

Rich

[Bill Howell]

Looking good. Are you putting on the ebrakes too? My brake set up on the 65 should be finished this week too.

[tripower]

Looking good. Are you putting on the ebrakes too? My brake set up on the 65 should be finished this week too.

Yep, the e-brakes are on. I snapped the pics as the job progressed. What are you running for brakes on your Goat? BTW, that is one awesome ride!!!!

[tripower]

Finally finished hooking up all the brake lines. Now it's on to the clevis and setting up the pedal and bleeding away.

Here's how my lines turned out from the distribution block to the MC and adjustable prop valve. It came out pretty clean looking from the top side. Stainless is nice but a pain to bend!