Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Jul 2005
      Location
      Texas
      Posts
      255
      Country Flag: United States

      Same size all corners????????

      Contemplating which wheels I will be putting on my 69 Nova. Running ridetech TruTurn up front and ridetech 4 Link/DSE Minitubs out back.

      Serioulsy thinking of running 18x10 all around with staggering the tires (275/35 front & 295/35 rear).

      Is anyone doing this? Not necessarily the exact tire size or wheel diameter, but same widths front and rear.

      Are there any cons in doing so? I just think it will handle like its on rails and wanted to get feedback. I welcome any and all feedback. I only ask that you play nice.

      Thanks



    2. #2
      Join Date
      Dec 2005
      Location
      Birmingham, AL
      Posts
      3,355
      Country Flag: United States
      I would think the narrower tires on the front would look more stretched and the fatter tires on the rear would look more bulged. If I were going to run different size tires I would run different rim width.
      Stephen

    3. #3
      Join Date
      Jul 2005
      Location
      Texas
      Posts
      255
      Country Flag: United States
      Both are approved sizes for a 10 inch wheel and the difference in 20mm between the 2 is negligible, IMO. Again, just my theory.

      I'm really referring more to performance pros/cons.

    4. #4
      Join Date
      Apr 2012
      Location
      Woodstock, IL
      Posts
      2,410
      Country Flag: United States

      Same size all corners????????

      In theory, a stretched tire like 275 on a 10" rim will flex less, giving more of a tight quick feel. However, you're limiting the contact patch with the pavement. I don't think you'd see any performance gain or loss by using say a 9-9.5" front instead of the 10.
      It all comes down to the cars purpose though, and if were talking street tires vs slicks.. I think you could get more out of fine tuning the suspension and focusing more on that

      -Dale
      SchwartzPerformance
      The leader in bolt-in muscle car chassis
      SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram

      Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more

    5. #5
      Join Date
      Aug 2011
      Location
      Clearwater/FL
      Posts
      512
      Country Flag: United States
      Why not run a square setup? Same size all around?
      85 monte, drift project- small block t5 and 8.8
      88 Blazer sbc
      05 300c




    Advertise on Pro-Touring.com