Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 10 of 10
    1. #1
      Join Date
      Jan 2013
      Location
      Cypress, California
      Posts
      381
      Country Flag: United States

      Right Stuff 13" Front Disc Brake ?

      Anyone familiar with the Right Stuff 13" front disc brake kit AFXWK31CS? This is for 64-72 GM A-bodies. The previous owner installed 11" single piston disc brakes in the front of my 65 Skylark and I am looking to upgrade the front brakes.

      I have read that maybe they are from a 2002 Cobra. I can't find anywhere the size of the pistons etc. I am wondering just how much on an upgrade they would be? I do have 17" rims. The previous rims were 15" Buick Rally wheels and they are a small 15" for brake sizing.



      No road racing or autocrossing. Just quarter mile and maybe some canyon carving.


    2. #2
      Join Date
      Feb 2005
      Location
      Waterloo, Ia
      Posts
      1,408
      I have them bought and at my house but i dont have them installed. the calipers are a 2002 Mustang Cobra. They are twin 45mm as opposed to the C5 which i believe are twin 40.5mm. The rotors are a 28mm thick C4 vette as opposed to a C5 wich is 32mm thick. The hubs, mounting brackets and hardware are really nice stuff. I think they'll probably be more than enough to haul down my GTO.











      -Nick
      -1967 GTO I drive and race
      -Build threads:
      -http://forums.maxperformanceinc.com/forums/showthread.php?t=615847&page=23
      -https://www.pro-touring.com/showthre...project-thread


    3. #3
      Join Date
      Jan 2013
      Location
      Cypress, California
      Posts
      381
      Country Flag: United States
      Thank You for the pictures. It does look like a nice set for the money. I also like the black color. As to the rotor thickness of 28mm versus 32mm that would probably only be important if one was autocrossing etc. I think I will go ahead and order a set.

      What is on my car now appears to be a generic 11" single piston rotor. Heck it could be 10.5" as I have not measured it yet, just eyeballing it.

    4. #4
      Join Date
      Jan 2006
      Location
      Oregon
      Posts
      1,773
      Country Flag: United States
      I could be mistaken, but those calipers look nothing like the 1999-2002 Mustang calipers, which have twin-45mm pistons and are a pin-guided design, but would appear to be the 1994-1998 Mustang caliper with twin-38mm pistons, similar to the 88-96 C4 Corvette. Those calipers are a pad guided design, hence the round holes in the face to capture the outer pad and the pad abutment bracket design for pad retention.

      Tobin
      KORE3
      It's what I does.

    5. #5
      Join Date
      Jun 2001
      Location
      Newbury Park, CA
      Posts
      5,839
      Country Flag: United States
      I'm with Tobin. There's a similar set in my garage that came off the Camaro three years ago.

      From a performance standpoint the C5 caliper is much better and there are more pad choices. Tobin will point you in the right direction here as to the best balance of caliper, rotor, pad, and performance needs.
      VaporWorx. We Give You Gas http://www.vaporworx.com

    6. #6
      Join Date
      Jan 2013
      Location
      Cypress, California
      Posts
      381
      Country Flag: United States
      Quote Originally Posted by Apogee View Post
      I could be mistaken, but those calipers look nothing like the 1999-2002 Mustang calipers, which have twin-45mm pistons and are a pin-guided design, but would appear to be the 1994-1998 Mustang caliper with twin-38mm pistons, similar to the 88-96 C4 Corvette. Those calipers are a pad guided design, hence the round holes in the face to capture the outer pad and the pad abutment bracket design for pad retention.

      Tobin
      KORE3
      Hmmmm, I would not mind the twin-45mm pistons but I don't think I would gain anything with the twin 38mm pistons. Putting the purchase on hold for now.

    7. #7
      Join Date
      Jan 2013
      Location
      Cypress, California
      Posts
      381
      Country Flag: United States
      Here is what I would like to have for my 1965 Buick Skylark. Aluminum caliper with 45-52mm twin pistons. 13" rotor. Re-use my stock spindles. I already have hubs with 7/16" studs.

      The wheels are 17" American Racing VN500s.

      Edit: I guess in reality if I have the ability to lock up the front tires that would do the trick.

    8. #8
      Join Date
      Feb 2005
      Location
      Waterloo, Ia
      Posts
      1,408
      Quote Originally Posted by Apogee View Post
      I could be mistaken, but those calipers look nothing like the 1999-2002 Mustang calipers, which have twin-45mm pistons and are a pin-guided design, but would appear to be the 1994-1998 Mustang caliper with twin-38mm pistons, similar to the 88-96 C4 Corvette. Those calipers are a pad guided design, hence the round holes in the face to capture the outer pad and the pad abutment bracket design for pad retention.

      Tobin
      KORE3

      Thanks Tobin. My mistake. I never looked them over very well. I just pulled them out and took a couple pics and back into the box they went. Im going to send TRSD an email asking a few questions because I was under the impression they were the later twin 45mm style? I guess I have a few questions now...

      -Are there any inherant issues with the 94-98 Cobra 38mm calipers as opposed to the 99-later 45mm calipers?

      -Are pin guided calipesr superior to pad guided calipers?

      -Are there any issues that come with pad guided calipers?
      -Nick
      -1967 GTO I drive and race
      -Build threads:
      -http://forums.maxperformanceinc.com/forums/showthread.php?t=615847&page=23
      -https://www.pro-touring.com/showthre...project-thread


    9. #9
      Join Date
      Jan 2006
      Location
      Oregon
      Posts
      1,773
      Country Flag: United States
      Quote Originally Posted by Nicks67GTO View Post
      Thanks Tobin. My mistake. I never looked them over very well. I just pulled them out and took a couple pics and back into the box they went. Im going to send TRSD an email asking a few questions because I was under the impression they were the later twin 45mm style? I guess I have a few questions now...

      -Are there any inherant issues with the 94-98 Cobra 38mm calipers as opposed to the 99-later 45mm calipers?

      -Are pin guided calipesr superior to pad guided calipers?

      -Are there any issues that come with pad guided calipers?
      There are no inherent issues with the pad-guided design, they did a respectable job on a variety of performance applications including the C4 Corvettes and noted Mustangs. That said, the main advantage that the pad-guided calipers have over their pin-guided cousins is their small overall size, which can be a plus with respect to certain wheel fitments, otherwise the pin-guided design is the superior design in almost every regard. Some disadvantages to the pad-guided design include limited pad area/volume, irregular pad wear and less caliper rigidity relative to the newer pin-guided designs. The rigidity issue becomes more noticeable due to the small piston area of the pad-guided calipers, as they require more pressure to achieve the same brake torques relative to some of the larger piston pin-guided variants like the C5/C6 units. Pin-guided designs also tend to be more reliable due to sealed and lubricated slide pins that are not exposed to the elements, so the service life tends to be longer and maintenance requirements lower.

      Tobin
      KORE3
      It's what I does.

    10. #10
      Join Date
      Jan 2013
      Location
      Cypress, California
      Posts
      381
      Country Flag: United States
      I got an email back from Right Stuff. They are indeed 38mm pistons. So that is out. I need to find out exactly what brakes I have on the front and go from there.




    Advertise on Pro-Touring.com