Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 8 of 8

    Hybrid View

    1. #1
      Join Date
      Mar 2004
      Location
      Mid-Michigan
      Posts
      2,764
      Country Flag: United States
      Leave them bare! I have to side with Dale on this one. Yea, naked aluminum wheels are a pain to maintain but at least you HAVE that ability. Clearing over the aluminum will work UNTIL you get a chip. Once the aluminum starts to oxidize you can do nothing to stop it. Like Dale said, look at any clear coated factory wheel that is more then a year old. Chips turn into spider webbed oxidized messes that eat up the aluminum and leave a dull pitted pock mark. I would rather spend a few hours a year cleaning and polishing then looking at a mess like that. Get some White Diamond polish.
      http://www.whitediamondamerica.com/metal-polish.html
      This stuff works and it leaves the aluminum shiney for a long time, even better then Mother's Billet Polish.
      Mark

      Mark:
      "Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
      This my Bad Ast thread...
      https://www.pro-touring.com/showthre...roject-Faze-II
      This is my Fotki album...
      http://astroracer.fotki.com/





    Advertise on Pro-Touring.com