ASA Cam?

[jwcarguy]

I have the engine in my 00 Silverado with 243 heads. I am already swapping out the heads so while I was at it could do the other stuff. The intake I have on it is the FAST LSXRT 102mm, I am still undecided if I will keep it with the Chevy II or sell it and go a different route. I know that I want to stay efi, been thinking of getting the FAST Ez Efi 2.0 that supports up to 1200hp.

edit:
I will be getting a t-56 magnum. The Silvy had an auto and it sucks at an idle, died out and everything in between. I might just keep the intake nowing that it will work better with a manual tranny. I think that if I swapped out the rockers to 1.8 it will give me a little more lift (.556). Or should I save the moeny and get trunnion upgrade and a different cam?

You have talked about what the engine is and some of the parts that you sourced, but the main question that will ultimately determine the correct course of action for you is....

What are your expectations and planned use of the car/ drivetrain???

we need to know that to help "get you on the right path" to have a car / engine that works for your application

you have to remember that this forum is filled with great members from all different back rounds, budgets and each have their own "purpose" in their builds

so what works for one guys application, may not be the best setup for another's application

looking forward to hearing more about your car and build plans

Jeff