Results 1 to 3 of 3
Thread: How do install this???
-
12-28-2013 #1
Registered User
- Join Date
- Jun 2013
- Location
- Middletown NJ
- Posts
- 53
How do install this???
PB215 is the only part number on the box. This is the disc/disc proportioning valve I am using for my set up. But idk how the heck to install it. What is the larger port in the back for?? And do I need the sensor on a custom brake kit? What is its purpose?? Also does anyone know with outlet is or front/rear? Instructions would be great if anyone has them??
If its too loud your too old
-
12-28-2013 #2
Registered User
- Join Date
- Jun 2009
- Location
- Piqua, Oh
- Posts
- 397
As they are oriented in the picture.
The 2 ports on the top go to the master cylinder.
The 2 ports on the left are left and right front brakes
the larger port to the right goes to the back brakes.
the "sensor" hooks to the brake light in your dash. It lets you know if you have a potential problem with your front to rear brakes. (ie: a leaking or broken line/caliper/wheel cylinder)Mike South
1968 Camaro SS/RS LS1/T56
Ride Tech Tru Turn, Ride Tech T/Q Coil-overs
Ride Tech 4-link
12-29-2013 #3
Registered User
- Join Date
- Jun 2013
- Location
- Middletown NJ
- Posts
- 53
How do install this???
Ok great thanks!!
If its too loud your too old
Reply With Quote
