Results 1 to 4 of 4
Thread: Canton Racing Oil Pans..
-
12-08-2013 #1
Registered User
- Join Date
- Jul 2010
- Location
- Mooresville,NC
- Posts
- 761
Canton Racing Oil Pans..
Hey guys...I was wondering who all else runs canton racing oil pans on here...and wondering about their quality on their oil pans...I replaced my oil pan gasket twice on my 357 SBC...where it leaks on the back lip of the pan in one spot twice...leaks no where else..the block is dry front and rear...leaking around the gasket to pan.....used silicone but still leaks...I used their stud kit with their gasket and pan...had hard time also getting the lock nuts started cause they where binding on the pan...mite end up reusing the stock pan when I pull the motor back out in few weeks....
Matt1971 Chevrolet Camaro RS-Detroit Speed Equipped
1966 Chevrolet C-10-Driver/Project truck
-
12-08-2013 #2
Registered User
- Join Date
- Nov 2005
- Posts
- 213
Pontiac application and it leaks the same. Add more silocone,
12-08-2013 #3
Registered User
- Join Date
- Apr 2009
- Location
- san diego
- Posts
- 5,101
I have their SBF pan in a box in the garage. 8 have not installed yet.
My build thread: https://www.pro-touring.com/showthre...ing&highlight=
The mustang build thread: https://www.pro-touring.com/showthre...el)&highlight=
12-10-2013 #4
Registered User
- Join Date
- Nov 2011
- Location
- Virginia
- Posts
- 229
Canton Racing Oil Pans..
Canton SBF 7qt road race pan in use with no leaks from the pan.
Reply With Quote
