Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6
    1. #1
      Join Date
      Oct 2007
      Location
      New Tampa Area
      Posts
      19

      Exhaust Clearance

      What is a safe minimum exhaust to rear tire clearance?

      Its 3" pipe which runs parallel to the sidewalls of the tire.

      The mini tube makes it tight!



      Thanks,
      Darin


    2. #2
      Join Date
      Sep 2010
      Location
      Santa Clara, CA
      Posts
      622
      Country Flag: United States

      Exhaust Clearance

      I have the same issue, would love to hear someone weigh in. I think that my passenger side rear tire is actually rubbing, so I know that's too close :-).
      Steve

    3. #3
      Join Date
      Apr 2012
      Location
      Woodstock, IL
      Posts
      2,410
      Country Flag: United States

      Exhaust Clearance

      I'd say less than an inch is cutting it close, but I've ran them as close as 1/2" with no issues.. When you're really on the throttle when the exhaust is hottest, the tires are moving fast and allows them to spread the heat out more.

      Hope that helps??? How close are you now? Could also ceramic coat the exhaust or put some other heat shield/wrap on it..

      -Dale
      SchwartzPerformance
      The leader in bolt-in muscle car chassis
      SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram

      Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more

    4. #4
      Join Date
      Oct 2007
      Location
      New Tampa Area
      Posts
      19
      I am in the same boat. My passenger side is slightly dragging on the tire.

      I am planning on adding 3/16" spacers and heating the exhaust pipe in the contact area and massaging it a bit to get maybe another 1/8" or so.

      That should give me around 5/16" clearance but not sure if that is enough.

    5. #5
      Join Date
      Oct 2007
      Location
      New Tampa Area
      Posts
      19
      Thanks for the response Dale!

      What would be a good heat wrap to use?



      Darin

    6. #6
      Join Date
      Sep 2010
      Location
      Santa Clara, CA
      Posts
      622
      Country Flag: United States

      Exhaust Clearance

      If you have enough clearance to wrap the pipe then I don't think you need to wrap the pipe....
      :-(
      I am hoping to be able to slip the whole pack of playing cards between the pipe and the tire, rather than just a single card.

      How hot does a tailpipe get?
      Steve




    Advertise on Pro-Touring.com