Results 1 to 6 of 6
Thread: How close is too close?
-
10-25-2013 #1
Registered User
- Join Date
- Feb 2009
- Location
- N.J.
- Posts
- 690
How close is too close?
Getting ready to start fabbing up the exhaust. I want to get it tucked up as close to the body as I can. So my question is "How close is too close?".
There is undercoating on the body and I'm running a 2.5" exhaust with a transverse muffler and about 300 hp.
- Paul
70 Camaro RS Project Build
https://www.pro-touring.com/showthre...-Project-70-RS
90 Mustang GT Project Build
https://www.pro-touring.com/threads/...ang-Gt-Project
My Garage Project
http://garagejournal.com/forum/showthread.php?t=189511
-
10-27-2013 #2
Registered User
- Join Date
- Feb 2009
- Location
- N.J.
- Posts
- 690
Bueller? Bueller?
- Paul
70 Camaro RS Project Build
https://www.pro-touring.com/showthre...-Project-70-RS
90 Mustang GT Project Build
https://www.pro-touring.com/threads/...ang-Gt-Project
My Garage Project
http://garagejournal.com/forum/showthread.php?t=189511
10-27-2013 #3
Registered User
- Join Date
- Apr 2012
- Location
- Woodstock, IL
- Posts
- 2,410
How close is too close?
Are you coating the exhaust?
Try not to go much less than 3/4" anywhere unless you have to- of course be aware of where your hangers and clamps will be.SchwartzPerformance
The leader in bolt-in muscle car chassis
SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram
Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more
10-29-2013 #4
Registered User
- Join Date
- Feb 2009
- Location
- N.J.
- Posts
- 690
Thanks, sounds good. My exhaust won't be coated but my headers are.
Thanks again for the response.- Paul
70 Camaro RS Project Build
https://www.pro-touring.com/showthre...-Project-70-RS
90 Mustang GT Project Build
https://www.pro-touring.com/threads/...ang-Gt-Project
My Garage Project
http://garagejournal.com/forum/showthread.php?t=189511
10-29-2013 #5
Registered User
- Join Date
- Aug 2004
- Location
- Ontario, Canada
- Posts
- 2,314
Some may suggest coating the entire exhaust but I've always considered any exhaust system as temporary. It always seems to get replaced for one reason or another (usually because of engine upgrades) making the coating pointless.
KenIf there is a hard way to do something, I'll find it!
My other car is a Vega.
10-30-2013 #6
Registered User
- Join Date
- Dec 2010
- Posts
- 709
I think .25 (quarter inch) is too close. It does however depend on how much you've fortified your chassis to increase torsional rigidity; the more flex you've got, the more your pipes are likely to hit something on the chassis when you push the car. Relative to your situation with exhaust, what's funny is that I've been holding on to my Ford HiPo exhaust manifolds (surprisingly large ports) for too long, and just finally replaced them with headers (only because my new aluminum heads made me). The headers fit way better, providing way more shock tower and overall clearance; in what world does this happen?
Reply With Quote
