Is this right for Rick's Tank

[tumper93]

I ordered a Rick's Tank earlier this week but received the sending unit today. I ordered it for a mini tubed 68 Camaro with cut corners and for a carb. The sending unit is like the factory unit with a 5/16 line. All the pictures I see these have a nice stainless fuel exit from the top of the tank which is part of a removable piece beside a different style sender. This is for a 600hp engine so am I expecting something I will not be receiving?

[tumper93]

Wow! No one has any comment or suggestion. I realize this isn't an LS discussion but I was hoping someone could help out

[Bryce]

Sorry Erik, I never order a ricks tank. So I cant give any advice on that. But 5/16" seams a little small for a 600hp car with a carb.

I have 3/8" line for my falcon and a 1/2" line for the drag mustang.

Maybe give Ricks a call Monday morning and ask for specifics.

[68lovebuzz]

I can't help with the line question due to having FI and a vaporworx setup. What I have noticed from ricks is that they send the parts to complete the tank in several packages, sometimes weeks apart. I got a harness, pump, and sender all separately from the tank over the course of a month. I thought this was definitely odd. More parts should be on the way and that may answer your question. Good luck. You'll be happy with the final product.

[rocketrod]

My vaporworx tank came complete and I had to run the fuel line right to the pump. I woul like to have a smale stainless steel hardline to attach the line to as there is very little room to get a wrench in there once the tank is installed.