Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7

    Threaded View

    1. #1
      Join Date
      Dec 2010
      Posts
      169

      Cobra Autox Engine

      We just finished a rebuild of my aluminum 498 cid Ford FE with some improvements after breaking a roller lifter axle last August at Laguna Seca. I am pretty happy with the results considering that the design of FE engines is basically from a 1950's era dump truck, and it is normally aspirated.
      The dyno used is located in the Detroit metro area and is relatively conservative. As an example they recently dynoed a Yates/Roush cup engine and it made 810 HP, Yates dynoed the engine at 850 HP.


      Results: 600 lb/ft or more from 4000 rpm to just under 7000 rpm
      over 800 HP from 7000 to 8000 rpm with a peak of 827 at 7500 rpm
      peak torque of 640 lb/ft at 5750 rpm about 100 lb/ft more than a cup engine but obviously lower rpm too.

      I am also putting in Baer 6 piston front brakes with 13" rotors in front and larger wheels 11.5 front and 12.5 rear with 315x18 fronts and 335x18 rears.

      Should be quite a ride in a 2300 lb car.






    Advertise on Pro-Touring.com