Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9
    1. #1
      Join Date
      Apr 2005
      Location
      IN/MI border
      Posts
      1,920
      Country Flag: United States

      Camaro window molding installation??

      Can anybody give me some instructions as to the process of installing the front and rear window molding onto a 1st gen camaro?

      I have all new clips, just not sure how exactly the clips are installed and how the trim snaps onto the clips.



      Thanks!


    2. #2
      Join Date
      May 2005
      Location
      Tacoma, Wa
      Posts
      232
      Country Flag: United States
      I just did this job and its a bit tedious; mostly because of not wanting to damage new paint. There should be studs around the window sides, bottom, and top. If your quarters were replaced then you should have installed or had studs installed again due to the new metal. The clips I had from steves camaros are red. These were supposedly the "best" on the market. You should see a hole in the clip. This hole goes over the stud. Then you adjust the clip on the stud (left or right) so when the trim is installed it is flush with the body. Once adjusted for height, I used some trim tools (ice pick) to pull the clip out (towards center of glass) just a tiny bit so as to accept the trim lip easier when installing. (they are very stiff new and this makes it easier to install). You will hear the trim "snap" on when it passes the clip. I would recommend painters tape on the body around window for protection, and plenty of light and take your time. I cant stress enought to take your time and walk away if you get flustered and come back after a beverage of choice. Cheers.
      Brian


      68lovebuzz
      68 Camaro, LS6, TKO 600, Moser 12 bolt 3.73 W/Eaton LSD, hotchkis/bilstein, KORE3 C5 brakes, RUSHFORTHs and a few other tweaks ; )

    3. #3
      Join Date
      Aug 2006
      Posts
      381
      Country Flag: United States
      Yes make sure you put plenty of masking tape to avoid damaging the new paint. My new paint got damaged because the stupid guy who was installing the new moldings did not bother to put any tape around the window area, so he ended up damaging the damn paint which really pissed me off. Now he has to removing the stupid moldings again to fix the paint on those areas. In fact, there are so many areas where paint got damaged and cipped becuase of his stupidy and carelessness
      72 Camaro RS:SOLD
      68 Camaro:
      LS6 Engine,Tremec TKO 600,5 Speed
      Complete Speedtech Subframe Kit,Speedtech Torque Arm, 9" Rearend from Strange, Wilwood Brakes, Minitubbed, Hotchkis Subframe Connectors

    4. #4
      Join Date
      Feb 2011
      Location
      dallas, tx
      Posts
      1,731
      Country Flag: United States
      anyone ever have issues with the trim stayin in place? Any tips? one of mine came off the other day after going out and having some fun lol

    5. #5
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,880
      Country Flag: United States
      Quote Originally Posted by icemanrd19 View Post
      anyone ever have issues with the trim stayin in place? Any tips? one of mine came off the other day after going out and having some fun lol
      Best clips I have found are sold by Steves Camaro Parts. Cheap offshore clips don't work.

      Don
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Estate Wagon
      1959 El Camino - Ironworks frame
      1956 Cameo - full C5 suspension/drivetrain
      1959 Apache Fleetside

    6. #6
      Join Date
      Apr 2016
      Posts
      245
      Lost the top molding twice guess I need to try Steves clips

    7. #7
      Join Date
      Feb 2011
      Location
      dallas, tx
      Posts
      1,731
      Country Flag: United States
      Quote Originally Posted by dhutton View Post
      Best clips I have found are sold by Steves Camaro Parts. Cheap offshore clips don't work.

      Don
      they are the same trim pieces
      here are the singles
      http://shop.stevescamaroparts.com/67...red-210917.htm


      Here are the fronts
      http://shop.stevescamaroparts.com/67...IPS-210918.htm

      Here are the rears
      http://shop.stevescamaroparts.com/67...pcs-210919.htm

      The only difference in the link is the amount of them.

    8. #8
      Join Date
      Feb 2011
      Location
      dallas, tx
      Posts
      1,731
      Country Flag: United States
      the new clips are made alot better. Look at the teeth on them where the clip grabs the studs. Bigger area to so the molding clips on the clip


    9. #9
      Join Date
      Feb 2011
      Location
      dallas, tx
      Posts
      1,731
      Country Flag: United States
      I had 3 back trim pieces that were loose, drivers side front piece and the front upper piece. I installed the clips which work on the front and back since they are the same and talk about a huge huge difference. The trim pieces snap right on and are solid.




    Advertise on Pro-Touring.com