Results 1 to 2 of 2
Thread: DSE X-Gen 535/595 Series Frame
-
07-04-2013 #1
Registered User
- Join Date
- Feb 2013
- Posts
- 29
DSE X-Gen 535/595 Series Frame
A question I thought about would the DSE X-Gen 535/595 Series Frame work with a G body car and would you be able to use same tire and rim combination as a 2nd gen Camaro for the front.
-
07-05-2013 #2
Registered User
- Join Date
- Feb 2013
- Posts
- 29
I talked to the guy's at DSE and I was told that the 595 series front clip is the same as the sec. gen Camaro and it would work with a Gbody Cutlass if it is 59 inches from hub to hub.... and it is. I thought of this to accommodate a 305,35,18 tire.It would take roughly 12 hours to do the work by DSE at $75 per hr. Now thinking of finders and inner fender wells. It is a good Idea for those who are looking at or want to use massive front tires.Now to figure out the rear...335
Reply With Quote
