"Just For Fun" MY 69 camaro

[dropit69]

Cars looking awesome David and Robert...and hope its all good news from hear on out David praying for ya..

[craigs73]

some nice work you do robert keep up the good work

[David Sloan]

Thanks Darrin! I could not ask for anything better!

I am working on the hood mounting now, it will open from the rear from now own. Got all the sheet metal work done but i will have to do some touch up were the 3rd link come's thur the floor. we are finishing that up now!
I put a 67 camaro gas filler in the 69's tail panel an got rid of the trunk lock, it will be a pull cable from inside the car now. pics to come!!
Thanks for looking!

[Tucks69]

Looks like yall have been busy David!! You are going to have a nice piece when you are done, wait a minute they are never done!! LOL

[David Sloan]

Thanks Michael
Yep i have been working on it a lot lately,there is a lot to be done when you dont buy bolt on parts LOL!!
And you make them your self!!
Yep your right they are never done, we can alway make something better!! I just want to drive this thing in the next couple months!! LOL!
Thanks for looking

[David Sloan]

I have been working on the hood hinges this is what i have so far, still looking for a latching mech, to hook at the rear of the hood too upper cowl area.
I wanted some thing simple an lite so this is what we came up with.
Thanks for looking

[Nessumsar]

Those hinges look really nice, love how clean they are.

You may have already mentioned it, but is there a reason you didn't lay the radiator the other direction and fab an air evacuator with all of the extra room?

[Gandalf]

Nice work!

You may have already mentioned it, but is there a reason you didn't lay the radiator the other direction and fab an air evacuator with all of the extra room?

x2 I was curious also - are you planning to run an intake over the top (eg: Corvette style)?

Keep 'em coming.
G.

[David Sloan]

Those hinges look really nice, love how clean they are.

You may have already mentioned it, but is there a reason you didn't lay the radiator the other direction and fab an air evacuator with all of the extra room?

Thanks
I wanted it as simple an lite as posible. Iam hopeing to come in at 3100 to 3200 pounds.

1 of the reasons for the rad lay back in this direction is the sway bar that we are looking at will mount on top of the frame rail in front of the motor, I dont have a link to show it ,maybe Robert can locate it an post it.
The other reason is that i wanted as much of the weight to be as low and as far back as posible.

Thanks for looking.

[David Sloan]

I started makeing Alum. door an rear panels today. Here is a couple shots.




Thanks

[RS_Customs]

Ok, time for a little update. We have both been very busy with all sorts of stuff that isn;t the car lol.

Anyway, finished the bracket designs for the 3-link and had them cut out today. Hope to have the time to tack them to the rear housing in the next couple days. We just set them up on the rear to see how they look.

Here you go!

Robert

[HectorM52]

I'm sure it's up there somewhere...but you guys going with panhard or watts?

[RS_Customs]

I'm sure it's up there somewhere...but you guys going with panhard or watts?

Pan hard bar.

Robert

[jgpclone]

thats some excellent work man

[David Sloan]

Time for a update
The Dash is mocked up an ready to unbolt epoxy prime do the body work an paint satin black. I think i have an idea for the A/C vent. That will require cutting holes for them.
And that will happen before paint.
The upper part of the dash has been body worked an primed all it needs is sanding and paint.

[David Sloan]

We got some more done to the 3 link here are some pics. of the lower control arm/shock mounts.
The shock mounts are a little crude but should hold up well.

[BulldawgMusclecars]

Looks great David! Any chance you and RS may offer the subframes and 3 link packages for sale? I have a customer who may be interested.

[parsonsj]

Nice stuff guys. Keep those pics coming.

jp

[ndm68]

Great build

[wellis77]

Looking great David. I was just thinking about your build yesterday as I ordered my Woodward rack. Glad to see you're still progressing.