Results 1 to 20 of 103
Thread: Beast Mode '69 Camaro
-
11-09-2013 #1
Registered User
- Join Date
- Jul 2011
- Posts
- 134
Beast Mode '69 Camaro
I've learned quite a bit over the last few years searching through build threads on Pro Touring and other sites and I figured it was time to share my project. I'm calling this car "BEAST MODE" It's a '69 Camaro and I know there are a lot of haters out there, but I still love them and I'm very happy to be buildng this car. My dad and I will be doing almost all of the work out of his garage. I purchased this car in 2011 from a guy in Georgia in fairly decent shape.
-
11-09-2013 #2
Registered User
- Join Date
- Jul 2011
- Posts
- 134
I wanted to have a solid starting point so I went with a Schwartz Performance G Machine Chassis with the following:
*Moser Full Floating 9”
*Baer 6P’s and 14” Rotors Front and Rear
*Aluminum Third Member w/Wavetrac Differential
*ridetech Triple Adjustables
Shout out to Dale @ Schwartz Performance
-
11-09-2013 #3
Registered User
- Join Date
- Jul 2011
- Posts
- 134
Wheels and Tires
*Forgeline GA3R Wheels Triple Gloss Black, Hidden Hardware Option
18X11 FRONT
18X12 REAR
*BF Goodrich G-Force Rivals
315/30ZR18 FRONT
335/30ZR18 REAR
-
11-09-2013 #4
Registered User
- Join Date
- Jul 2011
- Posts
- 134
Here is the body being mocked up on the chassis. I picked up the doors from Auto Metal Direct and they seem to be pretty good quality.
-
11-09-2013 #5
Registered User
- Join Date
- Jul 2011
- Posts
- 134
I also purchased ANVIL AUTO INC. parts
½ Carbon Fiber ½ Fiberglass
Hood, Cowl, Front Header, Wide Body Fenders, and Lower Front Valance, Trunk Lid.
-
11-09-2013 #6
Registered User
- Join Date
- Jul 2011
- Posts
- 134
So here is the car in rough mock up. At this point in time I have not decided on a paint color.
-
11-09-2013 #7
Registered User
- Join Date
- Jul 2011
- Posts
- 134
Currently I am undecided as far as the Engine and Transmission is concerned, but here are some of the other parts I have collected.
Ring Brothers:
Billet Air Frame Hood Hinges (Black Anodized)
Billet Door Strikers
Billet Door Jam Vents
Headlight Trim Rings
Standard '69 Grille in Black from YearOne
AutoRad Radiator with an Aluminum Core Support, Dual Electric Fans and Shroud
Aeromotive 20 Gallon A1000 Fuel Cell.
-
11-10-2013 #8
Registered User
- Join Date
- Mar 2013
- Posts
- 5



Reply With Quote