Results 1 to 4 of 4
Thread: Camaro Core Support Quality
-
09-01-2004 #1
Registered User
- Join Date
- Aug 2004
- Location
- Austin, in the great Nation of Texas
- Posts
- 48
Camaro Core Support Quality
Been a while since I've posted here, but I'm getting my project back underway. Here's my question...
I bought a Goodmark (made in China) core support and it's very obvious that the tooling is pretty sketchy with a lot of shrinking required for the top bar in front of the radiator to look half decent. Are the core supports sold through GM Restoration parts any better than the Goodmark knockoff?
Thanks!
-
09-01-2004 #2
New to Pro-Touring
- Join Date
- Aug 2004
- Location
- Altoona, Ia.
- Posts
- 30
Last time I called gm resto parts the told me there stuff is Goodmark just re-boxed.
09-01-2004 #3
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
rad supports
I was at a swap meet this week end at had the opertunity to compare the 3, dii,goodmark and original GM. non of which compared to orig. The weights alone where suprising. The dii stuff had some hole missin too. Factory (used that is) stuff is still out there, but be prepared to pay 125-175 for one. I got a line on a couple right now
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
09-01-2004 #4
New to Pro-Touring
- Join Date
- Aug 2004
- Location
- Flint, MI
- Posts
- 59
Core support
If you go to hearbeatcity.net they have NOS core supports for $295, that is obviously more than a factory used part but is another option, I am not sure to what caliber your restoration will be done. Also, if you have any other parts needs they have a very good selection of NOS parts as well goodmark, they might even sell factory used parts you would have to take a look. Good luck.
Reply With Quote
