subframe install

[roadrace67]

I am working on a 67 camaro and got the subframe back from getting powder coated and all new parts installed. my question is when installing the subframe back in the car how and where do you measure to square up the subframe? any help would be greatly appreciated.

[BuzzKillian]

There are (2) 5/8" holes in the Sub-Frame Firewall mounts. There is a 5/8" hole in the drivers side body mount and a 5/8" Slot in passengers side Body mount. Use those holes to line each other up. It is pretty good place to start anyway.

[Ron.in.SoCal]

There is a GM diagram that will give you proper dimensions which you can use to cross reference against an 'X' measurement. Send me a PM and with your email and I'll get you the whole enchillada...

[MrQuick]

this one's good...

[roadrace67]

Hey guys thanks for all the help! i am glad there is a site like this with a group of great people like all of you to help some one like me! i have built and modified alot of 4x4s but this is my first muscle car. again thanks and i appreciate all the help!!!!

[davidk68]

Thanks Vince, I needed that too :)