C5 spindle height

[evo69]

Does anyone know what the spindle height is on a C5 spindle? From upper BJ mounting surface to lower BJ mounting surface.

Thanks

[wickedmotorhead]

With a rough scale measurement, I got 12 5/32"

Shane

[Marcus SC&C]

Don`t forget the UBJ doesn`t go into the top of the C5 steering knuckle like a conventional one. The UBJ housing is IN the knuckle with the stud or pin going downward into a taper in the UCA. That radically relocates the pickup points. Marcus SC&C

[enroff]

Does anyone have complete dimensions for the C5 knuckle: Location of the upper and lower ball joints (ball centers) and tie rod ball center from the wheel rotation axis and the wheel mounting flange. I bought a C5 knuckle and hub but still need a lower ball joint and tie rod end to do all the measurements. I will be happy to share or compare results when I get them.


Thanks Steve