3rd Gen F-body Wheel on a 1st Gen?

[68Formula]

Is it possible to install, or would an adapter be required? I want to put a 3rd Gen wheel on my '68. I really like the design and size, plus junkyard hunting can be fun.

[b-man]

The bolt pattern (5 on 4.75") never changed on the F-body cars from '67 all the way to 2002.

As long as the backspacing and wheel width will work (do some measuring) you're good to go.

[sunkistcamaro]

The bolt pattern (5 on 4.75") never changed on the F-body cars from '67 all the way to 2002.

As long as the backspacing and wheel width will work (do some measuring) you're good to go.

I think he's asking about the steering wheel. right?

[b-man]

Right, interior forum!!

My mistake. :)

[68Formula]

Shoot, I was excited for a minute there! Anybody - steering wheel swap possible?

[sunkistcamaro]

3rd Gen wheel on my '68.
Im not really going to be much help but.. Im planning on putting a 04 GTO wheel and column into my 69. A adapter needs to made at the rag joint.

[68Formula]

Good reminder. I should clarify that I don't want to change the column, just the wheel.