adapter source now that Skulte is out

[WS6]

Skulte no longer makes custom wheel adapters so I need a new source. Obviously, I'm looking for a damn good company like Skulte. Suggestions?

Thanks

[DriverzInc]

What adapters do you need?

[WS6]

I need to adapt my BMW rims to the TA. So that's 5x4.75 to 5x120mm. They need to be 1/2" thick and hub centric. I don't have the hub centric measurements just yet. The biggest issue is the 1/2" thick. I know that's not very thick and I'll have to be careful what lug nuts I use to hold the adapters on. The other issue is I am not sure if I can even run a 1/2" adapter on the front and not have the rims stick out or rub. The front rims are 18x8 with a BS of 4-13/16" now. I was going to get the front end back on before I say yes to the front adapters. I need the 1/2" to get the rim out far enough to run a center cap and clear the bearing cap on the hub. Right now the rims are bolted on no problem but the bearing cap is sticking out.

Thanks Jon