Results 1 to 4 of 4
Thread: 8x15 inch weld and ats spindle
-
01-15-2009 #1
Registered User
- Join Date
- Jul 2008
- Location
- boones creek tennessee
- Posts
- 21
8x15 inch weld and ats spindle
does wilwood offer a drum to disc kit that will work with the ats tall spindle? i have enough coin to get the spindles and i was wondering about the brakes. backspace is the maximum for a stock suspended drum brake 68 camaro. the 8x15 and 10x15 will give me the look i want.any help would be greatly appreciated. thanks ta bragg
a poor man has poor ways.
-
01-15-2009 #2
-ɹoʇɐɹǝpoW-
- Join Date
- Jul 2002
- Location
- Mesquite, TX
- Posts
- 4,941
The ATS spindles don't mount your stock drums. You'll be using some manner of C5 or C6 Corvette brakes (be it stock GM or Wilwood or whatever) with ATS spindles.
I doubt you're going to find an off the shelf kit that will fit 15" wheels on a C5/C6 vette.
01-15-2009 #3
Registered User
- Join Date
- Jul 2008
- Location
- boones creek tennessee
- Posts
- 21
i think the ats site has a ssbc brake kit for this set up. i was wondering if anyone else did? or if anyone else has tried this?
a poor man has poor ways.
01-18-2009 #4
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,129
Is there a reason you want to run 15 inch wheels?
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
Reply With Quote
