Results 1 to 4 of 4
-
10-30-2018 #1
Registered User
- Join Date
- Jul 2013
- Location
- N. Scottsdale
- Posts
- 422
measuring backspace without brakes
I have a Wheel Works tool to measure back space for my rear wheels, but I don't have brakes yet. How much space do I need to include for the rotor hat? Will be using Baer 6P.
-
10-31-2018 #2
Registered User
- Join Date
- Dec 2008
- Location
- Detroit
- Posts
- 2,665
Depending on who you're using for wheels, some if the manufacturers have the information needed. Especially with a Baer or Wilwood setup.
Big dreams, small pockets....
Chris--
'72 Cutlass S LSA/T56 Magnum
Bowler Performance, Forgeline, Speedtech, ATS, Speartech, KORE3, Ridetech coilovers
Project Motor City Madness
10-31-2018 #3
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,129
Call Baer and ask how thick the rotor hats are. My guess is about 1/4".
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
11-02-2018 #4
Registered User
- Join Date
- Jul 2013
- Location
- N. Scottsdale
- Posts
- 422
Good guess. Baer said .300" for all their rotor hats.
Reply With Quote
