Wilwood 9 rear end

[slicknick]

Wilwood brakes trying to mount to a 9 rear end. When I put the backing plates on and slide axle in I don't have any room to tighten bolts due to my e brake pads in the way. Any suggestions

[Build-It-Break-It]

Remove the e brake pads then reinstall them after the bolts are tight.

[Buryingthesun]

Remove the e brake pads then reinstall them after the bolts are tight.


https://static1.pt-content.com/images/pt/2014/08/funnyblackmanfaceshockede1337411871915-1.jpg

[cwylie]

There should be an access hole in the axle flange you can put a socket through to tighten them