Momo on Chevelle's

[Shootstraight]

So I've searched and can't seem to find a fitment chart for Momo steering wheels, I even emailed them directly and no response. Will a Momo Nero steering wheel fit an A body column, mines a 72 Chevelle column with tilt? Will I need any adapters etc, I don't see anything listed for adapters even if it did? Any help would be great.

[NOT A TA]

When I put a Momo on my 70 Pontiac I used a Grant adapter and then a Momo to Grant adapter.

[Steve Chryssos]

You'll need that in conjunction with a Grant Installation kit. For a 72 Chevelle, it's Grant part number 3196

[Shootstraight]

So where does one find this info, I've not found any Momo adapters in my searching?

[65_LS1_T56]

I have an ididit column, but the stock mount is similar I believe. Momo has a 6 bolt pattern that will require an adapter for sure. My adapter came from ididit, but it may work on stock too??
you can see the mounting pattern here, mockup only 3 bolts installed.

[NOT A TA]

So where does one find this info, I've not found any Momo adapters in my searching?

http://www.amazon.com/MOMO-convert-G.../dp/B00C9TYD1W

[Shootstraight]

Well ordered it from Jegs, the guy swore that the Momo adapter would bolt to the GM column, so I ordered that, I guess we'll find out next week.

Thanks for the responses guys.

[4MuscleMachines]

I used lecarra, it looks much better than the momo adapter.

[csouth]

The MOMO K2401 should work fo that car. I had it for my Cutlass, but no longer need it when I bought paddle shifters.