Results 1 to 20 of 66
Thread: Zf 8hp70 mated to sbc
-
12-29-2016 #1Registered User
- Join Date
- Aug 2004
- Posts
- 11
Zf 8hp70 mated to sbc
I just finished swapping a 8 speed auto from a dodge ram into my 67 chevelle.
I'm posting this only to offer anyone interested in doing this any help / advice based on what I did to make it work.
it's really not too bad, I decided to rip the existing controller out of the tranny and used an external one.
other than that I used an ati adapter plate and 153 tooth gm flex plate to mate it up.
I am currently manually shifting using two buttons, shift up and shift down. I'll be adding auto mode someday however manual mode is really what I was after,
I actually only lock up the converter after 8th so it feels like a 9 speed.
it's basically the same as the hellcat tranny, I shift in under 200 ms and it barks the tires in every gear.
there's probably better trannys to use but I've tried 2sp, 3sp,4sp od, and a t56. This 8 spd kills them all
Again, I'm only posting to help others interested in doing this, it took me a lot of searching to find the info so I'd be happy to help anyone save some time do this.
A
-
07-14-2017 #2Registered User
- Join Date
- Apr 2010
- Location
- Sf bay area
- Posts
- 15
I am interested in learning more about how you made it work. What external controller did you use? Thanks, Pat
-
07-22-2017 #3Registered User
- Join Date
- Nov 2002
- Location
- Georgetown,TX
- Posts
- 2,558
I'm interested in learning more,too.
-
07-22-2017 #4