Results 1 to 4 of 4
Thread: Engineering Drawlings
-
08-23-2005 #1
Registered User
- Join Date
- Mar 2003
- Location
- Fallston, MD
- Posts
- 564
Engineering Drawlings
Does any one here know where I can find some engineering drawling of SBC, BBC And LS1 header flanges?
Any help is appreciated
Brian
-
08-23-2005 #2
Registered User
- Join Date
- Mar 2004
- Location
- Mid-Michigan
- Posts
- 2,764
Buy some gaskets and measure them up.
Mark:
"Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
This my Bad Ast thread...
https://www.pro-touring.com/showthre...roject-Faze-II
This is my Fotki album...
http://astroracer.fotki.com/
-
08-23-2005 #3
Registered User
- Join Date
- Mar 2003
- Location
- Fallston, MD
- Posts
- 564
Good Idea But I am At school right now 500 miles away from home with nothing more than a tape measure to measure them with. If I were at home I would take them to work and measure with a CMM. Id feel like a cave man trying to do it with a tape measure. I am used to working with a little more precision than that.
Brian
08-24-2005 #4
Registered User
- Join Date
- Aug 2004
- Location
- McMurdo Station, Antarctica
- Posts
- 211
Brian,
The GM Powermanual would have at least the bolt patern numbers listed. I don't have mine here at work, but I could look it up of you tonight if it would help.R.J.
Reply With Quote
