Right Stuff Control Arms chevelle

[guero68]

Just wanting to see if anyone has had any luck with Right Stuff control Arms(installing upper and lowers $500).....I am putting these on an 68 chevelle with viking coilovers....let me lay out my expectations...looking for an upgrade since my control arms are orginal ...yes i know there are better control arms UMI, Speed Tech ect(1000 plus) but those are breaking the bank for now since this was never in my buget/plans until i started install the coil overs. The purpose of the car is just to have a nice cruiser that I can drive for miles on end.. I know everyone on here is a harcore protourer and UMI is the way to go which I am not going to argue but not now for $$$$



Just want some feedback on these arms....hope not to hear of any horror stories with them since they make a pretty good braking package

[guero68]

well i found my answer first hand....the arms look pretty good I just opened the box and found out I can use the lower arms cause they have a nut welded to bolt on the shock and I cant put the coilover thru the bottom which i would never due cause I dont trust all that weight on those two little bolts...so in short retunring them ordering lower UMI arms for now until i can afford the uppers...as for the upper arms sending those back too...going to keep the oem ones for now since they were rebuilt not to long ago with pst poly bushings...

YUP...you get what you pay for...all I lost was my time and shipping it back...