Need a little help figuring something out

[SSLance]

The tire clearance issue is the inside front edge of the tire contacting the sway bar just before full turn left or right. When I ran the 36mm bar, the bar actually rubbed on the frame itself under compression and the tires rubbed the bar on sharp turns. It's more of just a hindrance than a real problem, it never did any damage to my tires, just had to watch for it when pulling back into grid spots or parking spaces at the mall #becausestreetcar ;)

The ridetech MonsterBar solved that with their fabbed steel sway bar links, they clear both the frame and the tires don't touch them.



What will you run for rims? Getting a 9.5" wide rim with the correct 5.0" backspace is tricky in either a 17" or 18" Most likely you'll have to special order them.