Need a little help figuring something out

[SSLance]

Had some down time while away and an internet connection, so I logged in to reread the instructions so they would start to sink in more. I believe I'm starting to get the idea better and better all the time.

My main concern is how I'm going to get the measurements when things are in the way...but I'm sure I'll figure them out.

Thanks again for all of the knowledge sharing Ron and thanks to David for stickying the thread. Hopefully many of us can help blueprint our cars better with the info in this thread.

[Ron Sutton]

Had some down time while away and an internet connection, so I logged in to reread the instructions so they would start to sink in more. I believe I'm starting to get the idea better and better all the time.

My main concern is how I'm going to get the measurements when things are in the way...but I'm sure I'll figure them out.

Thanks again for all of the knowledge sharing Ron and thanks to David for stickying the thread. Hopefully many of us can help blueprint our cars better with the info in this thread.

If you need more clarity or guidance, don't be afraid to ask. The first time is always intimidating. After measuring a car or 2, it becomes just another car thing. Once you get the #'s, I'll work out your front end geometry & we will know where you are. Then I can work out ways to achieve your handling goals.

Take care!