1965 Falcon Coyote Project

[Jetfixr320]

Hello everyone! I have been searching around for a while for anyone that has put a Coyote motor in their Falcon. Has anyone heard of anyone doing this? My 65 project was originally going to be a 302 or 351 with an AOD. I have already installed the TCI M2 front end and the TCI 4-Link rear with a Currie 9" with 3.89's . I really like the idea of the Coyote but cant find anyone to look to for any guidance that has done this in this particular car. The closest I can find is a 65 Stang. Any help would be greatly appreciated! Thanks!!

I was just reading in Modified Mustangs & Fords about the Coyote motor. Listed dimensions of the engine and different ford cars.
Also it said several of the aftermarket company's were working on or have kits to install them. I know for sure it listed Rod & Custom Motorsports.



Maybe give TCI a call?

It will probably be a change to your motor mounts. And you will need a power steering pump kit if your running a power rack. I thought i read that the coyote doesn't have a pump mounted to it?