Results 1 to 6 of 6
Thread: ls3 swap 65 Chevelle
-
03-13-2013 #1
Registered User
- Join Date
- Sep 2011
- Location
- Macomb, Mich.
- Posts
- 229
ls3 swap 65 Chevelle
I just bought 65 chevelle & I'm putting in an ls3 with a 4l65e transmission in it. I'm trying to find out what works best for this install? Headers, engine & trans mounts, engine harness & fuel tank setup?
-
03-13-2013 #2
Registered User
- Join Date
- Jun 2010
- Location
- Georgia
- Posts
- 2,177
we have a radiator that is set up for the LS in that application
03-22-2013 #3
Registered User
- Join Date
- Jun 2010
- Location
- Georgia
- Posts
- 2,177
for headers and mounts, talk to Jeff Georges at BRP Hot Rods (http://www.brphotrods.com). We are running their headers, engine mounts and crossmember in Project Sabre. It's all bolt-in stuff.
03-23-2013 #4
Registered User
- Join Date
- Sep 2011
- Location
- Macomb, Mich.
- Posts
- 229
Thanks, I'll look into that. I guess there's not a lot of 65 chevelle people on here.
03-25-2013 #5
Registered User
- Join Date
- Jan 2005
- Location
- Enfield, CT
- Posts
- 423
Yeah but there's a lot of 64-72 Chevelle, GTO, 442 etc. people on here. It's all the same...
'67 GTO - LS3, 4L60E, SC&C AFX Package, KORE3 C6 Z06, Boyds PT-09s
https://www.pro-touring.com/showthre...7-GTO-LS3-Swap
03-25-2013 #6
Registered User
- Join Date
- Jan 2013
- Location
- Cypress, California
- Posts
- 381
I am putting a L92 and 6L80 into a 65 Buick Skylark. The install of those parts are about 2 weeks off. I have selected the Dirty Dingo sliders and the tall and narrow stands. Going with Hedmans 1/3/4" to 1 7/8" long tube stepped headers. When you select your headers you need to know what engine mounts they recommend.
Reply With Quote
