Results 1 to 20 of 22
Threaded View
-
08-15-2005 #5
Registered User
- Join Date
- Apr 2003
- Location
- Central Valley, CA
- Posts
- 910
Unfortunately, I don't have the exact part numbers. I had the bracket modified at the same time I bought the supercharger from Scott @ SDCE; his phone number is 401-826-4400. Cost to modify the bracket was about $175 including the tensioner and additional idler pulley needed; there is a bit of machine work required.
Originally Posted by WELTERRACER
Also, I don't know if you are interested or not but I have a carb hat (modified for even flow by SDCE, worked fantastic for me at 15psi, very even A/F distribution) and I also have a blower to hat elbow with a surge valve provision for sale... you can see both of the pieces in THIS PICTURE. If you're interested, send me a PM.
Troy1969 Chevelle
Old setup: Procharged/intercooled/EFI 353 SBC, TKO, ATS/SPC/Global West suspension, C6 brakes & hydroboost.
In progress: LS2, 3.0 Whipple, T56 Magnum, torque arm & watts link, Wilwood Aero6/4 brakes, Mk60 ABS, vaporworx, floater 9" rear, etc.
-
Reply With Quote
