UCA's only?

[cornfedbill]

I agree, if you are only changing the UCA with stock geometry, you are not really gaining anything. Some control arms offer different geometry. Some are designed to work with taller spindles.



I would avoid the low cost control arms that can be found on Ebay or other discount outlets. If you don't have the money for the "good stuff" you will be better off with the stock UCA's. To get a good set of UCA's that will improve the geometry, you will be in for far more than the $100 powdercoating charge.

I suggest the Guldstrand mod and the stock control arms until you have the budget for a set of control arms with the proper spindles as a complete set. I think you will find the Guldstrand mod to be a big improvement. You may be happy with the performance and not see a need to change anything else for now.