Results 1 to 20 of 44
Thread: Vulcan 1968 SOHC 427 Mustang
Hybrid View
-
04-03-2017 #1
Registered User
- Join Date
- Sep 2009
- Location
- Port Richey Fl
- Posts
- 775
We had to add fiberglass to the side exhaust skirts to give us something to bond to the pinch weld.
Bonded to the rockers
Started the bodywork
Headlight bucket was bolted, bonded and fiberglassed to the fender
Front fender flares installed
Bodywork getting everything to line up
Ready for a couple coats of SPI epoxy primer
Rusty Gillis
Former SS/FA & SS/GA NHRA National Record Holder
-
06-27-2017 #2
Registered User
- Join Date
- Sep 2009
- Location
- Port Richey Fl
- Posts
- 775
Starting to fit the front apron
The shape was wrong under the headlight buckets so we cut it apart and glassed it back together
The spoiler was cut down and the front lip bonded back on.
After sanding
Bodywork to match the fender to the front apron
After a lot of sanding and priming
SPI black epoxy to seal the bodywork
Two coats of SPI Turbo primer
Rusty Gillis
Former SS/FA & SS/GA NHRA National Record Holder
Reply With Quote
