Results 1 to 1 of 1
-
01-21-2013 #1
Registered User
- Join Date
- May 2010
- Posts
- 35
general caster setting on a street car
Hi guys I am about to weld in a front suspension clip on my car. Before I do so, I just wanted to check my caster angle with everyone. I intend to set it 2 to 3 degrees of positive caster meaning that the top of the spindle will be tilted towards the back of the car and the bottom of the spindle will be forward. Is this all correct as a general starting point?
-
Reply With Quote
