Results 1 to 5 of 5
Thread: LS1/LS6 Flywheel
-
01-14-2013 #1
Registered User
- Join Date
- May 2005
- Location
- Tacoma, Wa
- Posts
- 232
LS1/LS6 Flywheel
LS1/LS6 Flywheel
I have a LS1/LS6 flywheel that I pulled off my LS6 engine. In the end I used a LS7 clutch with LS2 flywheel. I had it resurfaced to accept a new clutch (25$). The old clutch did not look bad at all but I figured since I'm in there I might as well.... The engine was pulled with 46K miles out of an 01' Zo6. All the teeth are perfect on ring gear. I'm not sure how much exactly it will cost to ship but I imagine it will be around 30-40$. If someone has interest I will check it out for sure. Thanks for looking.
List Date: 1/14/2013
For more info, check out this listing in the Pro-Touring.com marketplace: LS1/LS6 Flywheel
--------------------------------------
On Sale For: $90 + $40 Shipping
--------------------------------------
-
01-16-2013 #2
Registered User
- Join Date
- May 2005
- Location
- Tacoma, Wa
- Posts
- 232
Any takers? Bump to 60 bucks if anybody is interested.
Brian
68lovebuzz
68 Camaro, LS6, TKO 600, Moser 12 bolt 3.73 W/Eaton LSD, hotchkis/bilstein, KORE3 C5 brakes, RUSHFORTHs and a few other tweaks ; )
-
01-26-2013 #3
Registered User
- Join Date
- May 2005
- Location
- Tacoma, Wa
- Posts
- 232
Bump!
Brian
68lovebuzz
68 Camaro, LS6, TKO 600, Moser 12 bolt 3.73 W/Eaton LSD, hotchkis/bilstein, KORE3 C5 brakes, RUSHFORTHs and a few other tweaks ; )
-
02-04-2013 #4
Registered User
- Join Date
- Aug 2009
- Location
- Charlotte, NC
- Posts
- 171
Ship for $75?
-
02-04-2013 #5
Registered User
- Join Date
- May 2005
- Location
- Tacoma, Wa
- Posts
- 232
LS1/LS6 Flywheel
I'm sorry I can't. For the resurface and ship I would probably lose money. I've seen them used on eBay resurfaced for much more. Thanks for the offer
Brian
68lovebuzz
68 Camaro, LS6, TKO 600, Moser 12 bolt 3.73 W/Eaton LSD, hotchkis/bilstein, KORE3 C5 brakes, RUSHFORTHs and a few other tweaks ; )
-
Reply With Quote
