For Sale - 67-69 Hotchkis TVS Small Block Suspension Kit

[GeoffP]

For Sale - 67-69 Hotchkis TVS Small Block Suspension Kit

I'm selling the complete Hotchkis TVS kit from my 68 Camaro since I'm changing the suspension over to ridetech's full setup front and rear. It is the 2" front, 1.5" rear drop kit. Everything comes with the kit including the matching Bilstein shocks. The only thing that isn't included is the rear frame bushings. They pressed in very tightly where I don't think it's possible to remove them without ruining them. In addition, I'll include the rear shock mount plates and a pair of 1" cast steel lowering blocks. The kit is currently still installed on the car so it will have to be removed first. I will be pulling the parts over the next 2 weekends unless you need the parts sooner. Please note that the shipping price listed is not correct - I will ship for the ACTUAL shipping cost via UPS ground. Pictures will be available once I have the parts off the car. The kit is for sale for $1000 or best offer plus shipping. This setup has very few miles on it since it was installed. I'd estimate no more than about 3000-3500 miles total. Also, this kit was purchased before Hotchkis started including the rear sway bar frame mount. It has the brackets that attach the rear sway bar to the floor pan. If you have any questions, please ask!

List Date: 12/6/2012

For more info, check out this listing in the Pro-Touring.com marketplace: For Sale - 67-69 Hotchkis TVS Small Block Suspension Kit
--------------------------------------
On Sale For: $1000 + $100 Shipping


--------------------------------------

[GeoffP]

Man - lots of looks but no interest. If you're interested, please make an offer. I am just looking to get a fair price for these parts. I'm even willing to meet or deliver if it's close enough - 3-4 hours drive is doable for me. I'll even toss in the old front a-arms and stock drum spindles if the price is right and you're interested in the extra parts. The arms have 6-7 yr old Moog bushings and upper ball joints, plus I installed new Problem Solver Moog lower ball joints about a year and a half ago.

[Chris 68]

pm sent

[GeoffP]

I've got interest in the rear sway bar setup by itself. I'm going to give it until Saturday. If the whole kit does not sell by Saturday I am going to separate the kit and sell the pieces individually.

[GeoffP]

Sale pending on the rear sway bar setup and also on the remainder of the Hotchkis parts. Pending final agreement and payment. Thanks for looking!

[GeoffP]

Everything but the rear sway bar have sold. Thanks!

[GeoffP]

Complete Hotchkis rear sway bar for 67-69 Camaro still for sale! $200 plus shipping - snag this great deal before someone else does!

[ARAD RS]

PM sent.

[GeoffP]

Here's a picture of the sway bar as requested.

[68sixspeed]

Would you mind measuring the width of the rear sway bar so I can see if it will fit in my suspension? Thx Dan

[GeoffP]

The bar is 27" wide at the link attachment point. It is slightly wider by about an inch total at the bend.

[califconstruct]

Do you have the mounting plates that go on the inside? And underside where the dog bone connects?

Wednesday is fine.

Thank's.

[GeoffP]

Yes the bar is complete with all the brackets and hardware. I just didn't think about grabbing it to show in the picture.

[GeoffP]

The rear sway bar kit is sold pending payment. Thanks to all who inquired!

[califconstruct]

Payment Sent! Thanks!

[GeoffP]

Got it - Thanks! It'll ship tomorrow! All parts are SOLD!