Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Aug 2012
      Posts
      26
      Country Flag: United States

      rpm matching for cam and intake?

      ok so Im planning adding a performer rpm intake and a 650cfm edelbrock carb on to my olds 350. It has a ol4b eddy intake on it already with a 600 cfm carb eddy as well but I want to increase the power this thing puts out. so my question is with the rpm intake it says its good for power from 1,500-6,500 and the cam I want to install is a 275DEH @ Duration 275/282, Lift .476/.508, good for power from 1,500-5,800. so what Im wondering if this set up will work together. the trans is a th350 with a stage 2 shift kit not sure of the torque converter. the rear gears are the stock 3.08, and it has an MSD 6al ignition box but only has a points dizzy for now. I really would like to make this think a torque monster that's why I'm staying with a 650 carb instead of going 750. any help with helping me out on this combo would be great. thanks



    2. #2
      Join Date
      Aug 2012
      Posts
      26
      Country Flag: United States
      Bumb. Any ideas anyone?

    3. #3
      Join Date
      Mar 2011
      Location
      Ca
      Posts
      336
      Country Flag: United States
      that should work fine, the stock converter should work with that setup as well, but you'd benifit from a little more stall speed. what you'll need to worry about are your springs and clearences. i can't remember all the specifics off hand at the moment but i think you may have some problems with .508 lift on a stock head.

    4. #4
      Join Date
      Dec 2010
      Location
      Fredericksburg, VA.
      Posts
      3,164
      Country Flag: United States
      IMO, you would be better off loosing the 3.08 ring and pinion and switching to say a 3.55 or 3.73 if you really want to wake up the performance.
      Steve Hayes
      "Dust Off"
      68 Camaro

      Support the RPM Act
      https://www.sema.org/rpm-faq.

    5. #5
      Join Date
      Aug 2012
      Posts
      26
      Country Flag: United States
      ya as far as the valve springs come with the cam kit im looking at. as far as the rear gears I have full intentions of changing them out I was thinking about going with 3.42s just to keep a little highway driving if needed. as far as the head clearance if I remember right the stock rocker arms are 1.6.




    Advertise on Pro-Touring.com