Results 1 to 4 of 4
-
11-02-2012 #1
New to Pro-Touring
- Join Date
- Nov 2012
- Posts
- 2
Changed plugs, cap, rotor & wires and not will not start.
I changed plugs, cap, rotor, & the wires and now the engine will not start. I wired the cap with the correct firing order (4.3 Liter V6) 1.6.5.4.3.2,
I have spark from coil & also to plugs, I even sprayed starting fluid into the carb to see if that would do the trick. No luck
Any ideas would be greatly appreciated.
-
11-02-2012 #2
Registered User
- Join Date
- Jun 2012
- Location
- N.C.
- Posts
- 166
can we get some background info? does it have fuel pressure?
1970 Impala
"Some muscle cars are born great. Others have to be made that way. The debate about nature-versus-nurture. As to which approach is better doesn't matter so much as the end result"
11-02-2012 #3
Registered User
- Join Date
- Jul 2006
- Posts
- 294
Rotor tang not making contact with the coil terminal inside the dist cap.
Tom
11-03-2012 #4
New to Pro-Touring
- Join Date
- Nov 2012
- Posts
- 2
The van was running before I did the tune up it just hadn't had a tune up in years. I don't think there's a fuel pressure problem.
Reply With Quote
