Results 1 to 15 of 15
Threaded View
-
08-04-2005 #7
Registered User
- Join Date
- Aug 2004
- Location
- Maine
- Posts
- 594
Speaking from the experience I had with my own guage panel project, I'd go with lighter than 16 ga. steel. It is kind of overkill and just tougher to get a nice, properly placed, bend in... If I had it to do again, I'd use 20 ga.
Ditto the slightly under-sized hole saw and then hogging it out with a grinder.
John
-
Reply With Quote
